Toggle menu

Footwear Design for Disassembly and Recycling

3 min read

Header Image: Unsplash

by Nayanika Bharadwaj in Circularity

The need for circularity and closed-loop systems is gaining increasing traction in the fashion industry with major commitments by many industry behemoths and increasingly scalable development. These include mechanical and chemical recycling and materials such as Econyl that are infinitely recyclable. However, the footwear industry faces a more complex set of challenges in its transition to a sustainable system, particularly with regards to disposal and post-consumer life.

While there has been a growth in the usage of sustainable materials and of footwear brands that have built sustainability in their brands from their inception, the inclusion of circularity, particularly of reuse and recovery to ensure a completely closed-loop system still faces an enormous challenge across the industry.

It is estimated that around 20 billion pairs of footwear are created every year and approximately 300 million end up going to landfill, with a majority containing non-biodegradable materials including synthetic rubber, EVA foam, PU and PVC among others. Biological cycles of circularity raise concern as well – biodegradable materials such as natural rubber, wool and cotton can take up to 50 years to decompose in landfill conditions, releasing greenhouse gases in the process, while chrome – tanned leather and conventional dyes leach chemicals into waterways and soil systems.  

Thus, a technical circular cycle is considered optimum to ensuring a viable closed-loop system for the footwear industry. However, a number of obstacles can occur when considering recycling. One single shoe can contain 40 – 65 different components and 360 steps to be assembled. In addition, shoes are usually assembled using solvent-based adhesives such as Benzene and Toluene that are not soluble. Certain other permanent processes such as vulcanization where the upper, outsole and tape are bonded together, prevent resoleing. These factors make disassembly even harder, prompting almost every shoe ever made to be sent to landfill – a report by the Centre for SMART, Loughborough University cites that less than 5% are recycled.

Take-back programs are becoming increasingly popular, with footwear in turn being sent to second-hand markets in developing countries. This raises two areas of concern – one where local textile markets are affected with the influx of second-hand footwear into local economies and the fact that the life of the shoe is simply extended without solving the problem of its after-life.

This opens up an enormous opportunity to ensure resource recovery and a closed-loop system, that is still as yet a largely unmined area in the fashion industry.

The use of detachable components is starting to be explored and experimented with, by large companies. Stella McCartney’s Loop sneakers, for example, use a clipping mechanism instead of glue or thread, to attach the upper to the sole, similar to Lego. This allows for easy recycling at the end of life, ensuring that each component is appropriately processed according to material. Adidas have also released the Futurecraft.Loop a trainer made entirely of one material- a modified version of TPU. Using lasers instead of glue to attach the upper and sole, the mono-material characteristic enables 100% recyclability – the shoe can be ground into pellets, melted and returned to the original state again. Nike with Nike Grind have also experimented with breaking down footwear into pellets, turning them into material for flooring instead of new footwear.

 

The Better Shoes Foundation provides guidelines that can be considered when creating footwear meant to be part of a more holistically sustainable system. These include using thread instead of glue, using water-based glues such as Renia Aquilim 315 and Irutex™ FI 4006 1K and reducing the number of distinct components, enabling easier recyclability. 

As we face greater resource scarcity in the years to come, what is undeniable is the need for a systems-wide change in design, production and post-life recovery. Greater accountability on the part of small and large companies alike to come together to find viable, scalable solutions and invest in research and innovation can propel the fashion system towards reaching all of its sustainability goals. 

 

Nayanika Bharadwaj
Marketing Assistant at SupplyCompass
Share this article

Nayanika is a designer, writer and illustrator whose work spans research, storytelling and strategy for sustainability in fashion. Her interests specifically lie in sustainable supply chains, craft production/innovation, circular economies and design for social innovation. She graduated from the prestigious MA Fashion Futures program at London College of Fashion with a Distinction in 2019, and has researched at and written for Centre for Sustainable Fashion and Fashion Revolution, amongst others.

More on our blog

Platform Announcing our Deadstock Fabric Partnership with Queen of Raw
Announcing our Deadstock Fabric Partnership with Queen of Raw

We're thrilled to announce our partnership with Queen of Raw, as featured in Vogue Business. By joining forces, SupplyCompass Platform users will be able to access a myriad of deadstock fabric options via the SupplyCompass Deadstock Library to design more sustainable collections, create value from waste, and champion circularity.

by Flora Davidson

5 min read

Perspectives <i>Perspectives</i> from Re:Down
Perspectives from Re:Down

SupplyCompass speaks to Eric Firmann, Co-Founder of Re: Down, a business recycling post-consumer down and feathers for insulation in the apparel and bedding industries. He walks us through their innovative process, how they have coped through the pandemic, and what his visions for a circular industry are.

by Nayanika Bharadwaj

3 min read

Production How to Minimise your Impact as a Fashion Brand Through Sustainable Packaging
How to Minimise your Impact as a Fashion Brand Through Sustainable Packaging

Our partner noissue provides inspiration around sustainable packaging for brands looking to level up. Packaging is one of the areas where people interact with your brand the most, so it can have a big impact when you switch out a non-sustainable option for something greener.

by Elly Strang

5 min

Get started with our platform

Let’s stay
in touch!

Everything you need to know about sustainable supply chains, including industry news and product updates, delivered straight to your inbox.